Release Notes - Lightware Device Controller

Copyright © 2014-2020 Lightware Visual Engineering LLC

2.5.16

Released: 2022.03.30.

New Features

VINX family

• [LOBEX-4312] - Unencrypted login is now supported

MMX8x4 family

• [MMX8X4-3561] - MMX8x8-HT440 and MMX8x8-HT080 are supported

2.5.15

Released: 2022.03.09.

New Features

MX2M modular matrix family

• [MX2M-7631] - The MX2M frame now supports new cards without an FPGA

MX2 standalone family

• MX2-48x48-DH-48DPi-A-R and MX2-8x8-DH-4DPio-A are supported

2.5.14

Released: 2022.02.09.

New Features

UBEX Family

• Point to Point KVM extension is supported
• Matrix mode KVM switching is enabled

Bug Fixes

VINX family

• [LDC-6082] - Tile view bug fixed if Videowall is set

2.5.13

Released: 2021.12.09.

New Features

MMX2 Family

• MMX2-4x1-H20 and MMX2-4x3-H20 are supported

VINX family

• Custom logo for VINX family decoders are supported
• VINX family crosspoint view enhancements

WP-VINX family

• WP-VINX-110P-HDMI-ENC is supported

HDMI-3D-OPT family

• HDMI-3D-OPT-RX110DD and HDMI-3D-OPT-TX210DD are supported

Bug Fixes

General

• [LDC-4370] - Add new favorite device dialog size is fixed.
• [LDC-6036] - Gateway textfield is become mandatory on remote ip change dialog.
• [LDC-6039] - Asking for credentials incorrectly when connecting bug fixed.

Known Issues

VINX and WP-VINX family

• [LOBEX-4284] - It might take an unusually long time to display the crosspoint view when there are more than 100 VINX devices in the subnet.

2.5.12

Released: 2021.10.14.

New Features

Taurus UCX Family

• UCX-4x1-H20 and UCX-4x3-H20 are supported

RAC-B501

• RAC-B501 is supported

2.5.11

Released: 2021.09.02.

New Features

General

• Secure websocket connection support

UBEX family

• Support for Scaler on video pipe 2 on endpoints

Bug Fixes

General

• [LDC-5268] - EDID calculating bug fixed
• [MXH2-583] - CLOSE call on nodes after deleting bug fixed.
• [LDC-5492] - Querying not existing properties bug fixed.

UBEX Family

• [UBEX-7826] - Edit Videowall button bugfix.

2.5.10

Released: 2021.07.01.

New Features

WP-UMX family

• Advanced Control Pack v3 support added

Bug Fixes

Taurus UCX Family

• [TAUR-5096] - A warning dialog for HTTP/HTTPS service restart is now displayed if the user changes the host name of the Taurus
• [TAUR-5099] - SSL error bug fixed
• [TAUR-5109] - Correct time zone in Set date & time section
• [TAUR-5129] - Userscript upload issue fixed

2.5.8

Released: 2021.06.10.

New Features

General

• [LDC-5292] - Devices with only secure websocket connection enabled are now discovered by Device Discovery.

HDMI-TPS-RX200 family

• Advanced Control Pack v3 support added

Taurus UCX Family

• New supported variants
• Security features support
• RS232 support added
• Userscript download feature

UBEX family

• HBR audio is now supported.

Bug Fixes

Taurus UCX Family

• [TAUR-5083] - Wrong date setting issue fixed.
• [TAUR-5002] - UART node path and name changed.

HDMI-TPS-RX220AK

• [LDC-5622] - HTTP, TCP tab bugfix

UBEX family

• [LDC-5496] - Signal bandwidth calculation bugfix on output port panels

2.5.7

Released: 2021.04.22.

New Features

UMX-TPS-TX140

• Advanced Control Pack v3 support added

Bug Fixes

HDMI-3D-OPT-TX210 Family

• [LDC-4392] - HDMI-3D-OPT-TX210 connection issue fixed.

HDMI-TPS-TX220, HDMI-TPS-TX210, HDMI-TPS-TX226, SW4-TPS-TX240, DVI-HDCP-TPS-TX220, DVI-HDCP-TPS-TX210, DP-TPS-TX220, DP-TPS-TX210, SW4-TPS-TX240-Plus

• [LDC-5267] - Front panel settings for non-existing buttons removed.

2.5.6

Released: 2021.04.08.

New Features

General

• [LDC-5253] - Lightware Device Controller code is now digitally signed on Windows and MacOS

UMX-HDMI-140

• Advanced Control Pack v3 support added

Bug Fixes

General

• [LDC-4994] - MAC filter apply function wrong command ordering bug fixed.
• [LDC-5280] - Advanced view: Tree view subnode querying bug fixed
• [LDC-5282] - New LDC instance launching error fixed

RAP-B511

• [LDC-4991] - "Test button press" button release not firing event bug fixed

Taurus UCX family

• EDID Editor bugfixes

SW4-TPS-TX240-Plus

• [LDC-4990] - Connected source displaying bug fixed.

UMX-HDMI-140

• [LDC-5218] - Settings / Backup not showing bug fixed.

2.5.5

Released: 2021.03.25.

New Features

General

• [LDC-4364] - Favourite device can now be added by hostname.
• [LDC-5057] - Favourite ethernet devices list export / import functionality added.

Bug Fixes

General

• [LDC-3399] - EDID with DisplayID saving to file bugfix.
• [LDC-5233] - Newly added favourite ethernet device is always displayed as available bug fixed.

UCX-4x2 family

• [LDC-4991] - Taurus UCX remote IP changing bug fixed.

2.5.4

Released: 2021.03.04.

New Features

UCX-4x2 family

• New improved layout with new features.

Bug Fixes

UCX-4x2 family

• [TAUR-4114] - Invalid parameter count bug fixed at GPIO ports interval function call.

2.5.3

Released: 2021.02.18.

New Features

MX2M modular matrix family

• Dante audio board support added.
• From this version on, CEC is supported by the video IO boards.
• Presets created via the front panel are displayed as video presets on the embedded web and in the LDC application.

SW4-TPS Family

• Advanced Feature Pack V3 support added.

Bug Fixes

General

• [LDC-4554] - Variable displaying in Event Summary bug fixed.

HDMI20-OPTC-TX220-PRO

• [LDC-4989] - Ethernet port speed is now displayed correctly.

MX2M modular matrix family

• [LDC-4384] - Warning message box displayed message bugfix.

RAP-B511

• [LDC-4369] - Volume control section - ethernet IP address and port validation added.
• [LDC-4565] - Package version is now displayed under Settings / Status menu.
• [LDC-4753] - Icon positioning bug fixed.

2.5.2

Released: 2021.01.28.

New Features

General

• LMDMP support added.

VINX

• [LOBEX-4225] - Black screen output support added to decoder unit

RAP-B511 family

• [LDC-4376] - LWR-H (Taurus UCX) audio scheme added

Bug Fixes

General

• [LDC-4759] - EDID.Features property querying where not available bug fixed.

MX2 standalone family

• [LDC-4760] - Unavailable voltage properties querying bug fixed.

2.5.1

Released: 2020.12.17.

New Features

Advanced Control Pack v3

• [LDC-3826] - Property changed to anything condition has been added to Event Manager.
• [LDC-4152] - Condition linking: number of linkable conditions increased to 4.
• [LDC-4386] - A list of linked conditions / actions appear in confirm dialog of deleting an event.

General

• EDID DisplayID support added.

MMX8x4 family

• [LDC-4550] - UART Recognizer function added to TPS Serial ports in MMX8x4 product family.

RAP-B511 family

• Advanced Control Pack v3 support added
• [LDC-4535] - Unmute on volume change enable checkbox added.

Bug Fixes

RAP-B511

• [LDC-3346] - IR / Ports page port number input field bugfix. Save / Cancel button state management bugfix.
• [LDC-4529] - Layout fixes has been applied on Interactions section.
• [LDC-4547] - Select proper button / led in dropdowns on UIConfig event editor dialog, which has been selected for editing.

UBEX-MMU-X200

• [LDC-4151] - Firmware upgrade page warning dialog missing close icon bug fixed.

Known Issues

Advanced Control Pack v3

• [LDC-4554] - Linking of conditions which use variables does not work correctly.

General

• Easy EDID Creator: DisplayID extensions are not saved to EDID files in .dat format.

2.5.0

Released: 2020.11.25.

New Features

UCX-4x2 family

• UCX-4x2 family is now supported

RAP-B511

• [SBP-685] - Button configuration swapping functionality added.

Bug Fixes

RAP-B511

• [LDC-4159] - Fixed UI configurator.
• [LDC-3730] - Missing icons added.
• [SBP-791] - Event condition linking bugfix.

Improvements

RAP-B511

• [SBP-682] - Audio scheme for VINX added.
• Audio scheme for UCX-4x2 family added.

Known Issues

UCX-4x2 family

• Advanced View window can influence other LDC windows which are displayed concurrently. Closing nodes in the Advanced View window Protocol tree might cause other LDC windows using the same nodes to stop responding to changes.
  Work around: Re-open other LDC windows after using Advanced view to ensure contained information is up-to-date.

2.4.2

Released: 2020-11-11

New Features

MMX8X4-HT family

• Advanced Control Package v3 support added.

Bug Fixes

MMX4x2 family

• [LDC-4144] - TCP Recognizer page: rows in the table can be copied.

Improvements

UBEX-MMU

• [UBEX-7508] - Terminal performance optimization.
• [UBEX-7498] - Column widths changed on EDID page.
• [UBEX-7495] - Diagnostics page performance optimization.
• [UBEX-7484] - Maximum temperature value is now displayed on Health status page.
• [UBEX-7483] - Device label is now editable on Link Status page.
• [UBEX-7482] - Progress indicator is shown if the software is busy.
• [UBEX-7479] - Settings / System monitor submenu content moved to Diagnostics menu.
• [UBEX-7472] - Control / RS232 and Control / Infra pages are not visible if the endpoints in the system does not have these kind of ports.
• [UBEX-7463] - Performance improvements are applied on many pages (Crosspoint Grid View, Crosspoint Tile View, EDID Management, Diagnostics, Device Map, etc.)

2.4.1

Released: 2020-10-08

New Features

MMX4x2 family

• [EVM-95] - We have added method to send Wake On LAN packet.
• [TPSRX200-1990] - We have added AND operator for Event Manager Conditions.
• [TPSRX200-1994] - We have added Message recognizer for TCP clients.
• [TPSRX200-1994] - We have added Permanent TCP clients with configurable target IP address.
• [TPSRX200-1995] - We have added LW3 command-salvo over Http POST (protocol.lw3).
• [TPSRX200-1999] - We have added Http message sending with sendHttpPost and sendHttpPut (target server IP, target filepath, header, body).
• [TPSRX200-2003] - We have added Variable handling for Event Manager.
• [TPSRX200-2007] - We have added cleartext login function (disabled by default).
• [TPSRX200-2012] - We have added IP port and services filtering.
• [TPSRX200-2013] - We have added Condition triggering for Event Manager.
• [TPSRX200-2046] - We have added new method for CEC control button sendClick.
• [TPSRX200-2258] - We have added MAC filtering.
• [TPSRX200-2273] - We have added Macro capability (running partial device preset with tags).
• [TPSRX200-3427] - We have added property to indicate FeaturePackVersion.

Known Issues

MMX4x2 family

• [LDC-3733] - With older v1.3 firmware, LDC does not close /MANAGEMENT/STATUS node when not needed.

2.4.0

Released: 2020-08-13

New Features

LW3 Devices

• We have added support for the MX2M modular matrix family.

2.3.0

Released: 2020-07-09

New Features

LW3 Devices

• [TPSRX200-2299] - We have added support for MMX4x2-HDMI-USB20-L and MMX4x2-HDMI-USB20-Slim.

2.2.1

Released: 2020-06-03

New Features

UBEX

• [UBEX-7016] - Firmware Upgrade page: a warning message dialog appears if the upgrade package version is higher than v1.4.0 and at least one of the selected device has firmware version below v1.4.0.
• [UBEX-7133] - Detailed HDCP version added to Port tab.
• [UBEX-7134] - Timing mode settings can be fallback from Source locked to Free run. This fallback is shown in LDC too.

Bug Fixes

UBEX

• [UBEX-7388] - LDC videowall issues are fixed.

2.2.0

Released: 2020-05-28

New Features

LW3 Devices

• [MMX8X4-2170] - We have added support for MMX8x8-HDMI-4K-A-USB20.
• [LDC-1933] - Event Manager tab row has been reorganized.
• [LDC-2714] - Product name, part number, MAC address, IP address and subnet mask can be copied to clipboard.
• [LDC-2815] - EDID tables can be sorted and filtered.
• [LDC-3198] - Advanced View Terminal can display timestamps.
• [LDC-3199] - Frame Detector has gained the Export feature similar to MX-FR matrices.
• [LDC-3260] - Firmware package version is displayed on Settings / Status page.
• [LDC-3440] - Text input fields paste the plain text version of the clipboard contents.

MMX4x2 family

• [TPSRX200-2025] - We have added support to upload built-in miniweb.

Bug Fixes

LW3 Devices

• [LDC-3200] - Volume slider dB display glitch has been fixed.

General

• [LDC-3413] - We have fixed a bug in the Windows installer that causes the message "Failed to install Visual C++ redistributable! 3010" to appear.
• [LDC-3443] - We have fixed a bug on the auto update server which caused slow downloads to fail before finishing.

MMX4x2 family

• [LDC-3449] - We have fixed the CEC controller.

Known Issues

Gateway

• [LDC-3417] - Units cannot be reached via native RS-232. As a workaround, we recommend using USB-serial adapter or downgrading LDC. In general, we suggest connecting via TCP/IP or USB when possible to achieve faster communication and quicker application response.
• [LDC-3445] - When running LDC in a Windows virtual machine on Windows host, the application may appear visually distorted. As a workaround, we recommend executing "set QT_OPENGL=angle" on the command line before running LDC.

2.1.0

Released: 2020-05-21

New Features

UBEX

• [UBEX-7353] - Indication of incompatible SFP optical module has been added to Extender mode and Matrix mode.
• [UBEX-7266] - Overall Health status page has been added to the System monitor in UBEX Matrix mode.
• [UBEX-7214] - Dark mode has been added to the MMU.
• [UBEX-7212] - Overall Link status page has been added to System monitor in UBEX Matrix mode.
• [UBEX-7213] - The main menu items are clickable in UBEX Matrix mode for quick navigation.
• [UBEX-7144] - Embedded web supports forcing HDCP 2.2 Type 1 Content on outputs.
• [UBEX-6936] - MUX selector has been added for copy (RX, TRX) and local inputs (RX) functions.
• [UBEX-6914] - Freeze button added for manual freeze video.
• [UBEX-6886] - Freeze option added to No sync screen.

RAP-B511

• [SBP-682] - We have added VINX option to rotary scheme dropdown.

Bug Fixes

Gateway

• [LDC-3439] - We have fixed a bug which prevented input of characters that need pressing AltGr key.

UBEX

• [UBEX-7072] - We have fixed display of the operation mode of the endpoints.

RAP-B511

• [SBP-668] - Font size has been fixed on VOL UP icon.
• [SBP-681] - On UI Config page, we have fixed VINX Mute / Unmute command.
• [SBP-683] - We have fixed the built-in web appearance in Samsung mobile browser.
• [SBP-684] - We have fixed button alignment on the built-in web.

VINX family

• [LOBEX-4159] - EDID F89 is now recognized as analog.

Known Issues

Gateway

• [LDC-3413] - The Windows LDC installer may report "Failed to install Visual C++ redistributable! 3010" error message. In this case installation was successful, you only need to restart your computer.
• [LDC-3417] - Units cannot be reached via native RS-232. As a workaround, we recommend using USB-serial adapter or downgrading LDC. In general, we suggest connecting via TCP/IP or USB when possible to achieve faster communication and quicker application response.
• [LDC-3445] - When running LDC in a Windows virtual machine on Windows host, the application may appear visually distorted. As a workaround, we recommend executing "set QT_OPENGL=angle" on the command line before running LDC.

2.0.0

Released: 2020-04-27

New Features

General

• [LDC-333] - We have added Linux support to LDC. The distributed AppImage file can be executed without installation.

Device Discovery

• [LDC-2737] - Network device discovery has been rewritten from scratch. LDC no longer needs to install a 3rd party Bonjour service to find devices. Many issues regarding missing, disappearing, duplicate or phantom devices have been resolved.
• [LDC-3173] - The What's new window has been added. It pops up after upgrading to a new version and informs the user about the most important changes. Still, we recommend to consult the Release Notes for a detailed changelog.
• [LDC-3304] - Connecting to a device via serial port has been improved.
• [LDC-3363] - The application remembers the position of the vertical separator between sessions.

HDMI-TPS-RX220AK

• [LDC-3210] - We have added missing Lock buttons to video and audio inputs.
• [LDC-3212] - We have added '12V remote' measurement to the status display.
• [LDC-3256] - We have added missing Autoselect settings to outputs.
• [LDC-3257] - We have added Front panel settings / input select button checkbox.
• [LDC-3358] - We have added the RS-232 message recognizer feature.
• [LDC-3359] - We have added the CEC controller feature.

Bug Fixes

Device Discovery

• [LDC-3361] - We have fixed a bug which caused wrong item order when devices were sorted by port number.

LW3 Devices

• [LDC-3194] - We have corrected the 'Clear built-in miniweb' dialog text.
• [LDC-3297] - We have fixed emulated EDID memory display on video input properties.
• [LDC-3298] - Autoselect window refreshes properly when device state changes.
• [LDC-3323] - In Advanced view, some LW3 MAN texts were not displayed proprely.

LW2 Devices

• [LDC-3332] - We have fixed a bug in EDID list that caused an ever-growing scrollbar.

MX2 family

• [LDC-3214] - We have fixed DisplayPort swing / pre-emphasis display.
• [LDC-3325] - RS-232 Factory defaults button has been fixed to set serial port state to enabled.

MMX6x2 family

• [LDC-3316] - We have added missing Reload factory defaults button to TPS outputs.

Known Issues

General

• [LDC-3306] - Some user preferences from LDC v1.x will be forgotten and need to be set again.

HDMI20-OPTC family

• [LDC-3378] - When switching to the remote device and then returning to Device Discovery, the software hangs for some seconds and displays the What's new window. As a workaround, we recommend switching to the remote device via Device Discovery.

1.34.2

Released: 2020-01-29

Bug Fixes

LW2 Devices

• [MXFR-3926] - We have fixed MX-FR9R and MX-FR17R support.

1.34.1

Released: 2020-01-13

Bug Fixes

LW3 Devices

• [LDC-3201] - We have fixed a bug in autoselect window which caused 'undefined' to appear as port names.
• [LDC-3202] - We have fixed a bug in autoselect window which caused incorrect LW3 commands.
• [LDC-3204] - Minor style fix in autoselect window.
• [LDC-3205] - We have fixed 'Follow video' autoselect mode to appear only for audio ports.

1.34.0

Released: 2019-11-28

New Features

LW3 Devices

• We have added support for UMX-TPS-TX140K and HDMI-TPS-RX220AK.
• We have added support for VINX-120AP-HDMI-ENC-DNT.
• We have added support for MX2 matrices with DisplayPort outputs.

LW2 Devices

• [MXFR-3926] - We have added support for MX-FR9R and MX-FR17R.

VINX

• [LOBEX-1357] - Factory defaults button added to Advanced Setup page.
• [LOBEX-2758] - Video stream id is now changeable from device property panel on grid view.

Bug Fixes

LW3 Devices

• [LDC-3179] - Missing 'Follow video' option added to audio output property panel.

UBEX-MMU-X200

• [UBEX-4578] - Stream parameters dialog window now has a 1000px x 600px minimum size in case of LDC.
• [UBEX-6527] - Grid view scrollbar positioning bug fixed.
• [UBEX-6772] - Missing CLOSE call on UPLINK/* added.
• [UBEX-6972] - Tile view performance improved.
• [UBEX-6988] - Tile view port panel disappearing bug fixed.
• [UBEX-6989] - Grid view displaying on smaller resolutions improved.
• [UBEX-6992] - Tile View crosspoint state upgrading bug fixed.
• [UBEX-6994] - Grid view unwanted scroll position reset bug fixed.
• [UBEX-7003] - Firmware Upgrade page state handling bug fixed.
• [UBEX-7016] - Firmware Upgrade page: a warning message dialog appears if the upgrade package version is higher than v1.4.0 and at least one of the selected device has firmware version below v1.4.0.
• [UBEX-7017] - Confirmation dialog opened from separate property panel window appears on the main screen bug fixed.
• [UBEX-7025] - Breakpoint differences in Tile view between built-in web and LDC versions eliminated.
• [UBEX-7028] - Highlighted streams section's layout changes in case of smaller window size in order to display as much as possible characters from stream names.
• [UBEX-7029] - 'Drag stream here' label remains visible after assigning destination stream to video wall bug fixed.
• [UBEX-7063] - A filter for UBEX-PRO20-HDMI-R100 family added to the Firmware upgrade page.

RAP-B511

• [SBP-670] - Restore process progress indicator invalid value bug fixed.

MX2 Standalone matrices

• [MXH2-2985] - LW3 communication performance improvements added.

VINX

• [LOBEX-2754] - Legend dialog bugs fixed.
• [LOBEX-4050] - Layout bugs on smaller resolutions fixed.
• [LOBEX-4072] - Audio ioSelect: added 4th parameter value.
• [LOBEX-4079] - Video wall with only one row or column creation bug fixed.
• [LOBEX-4099] - Main menu disappearing bug fixed.
• [LOBEX-4114] - Video stream id arrow button positioning bug fixed on property panel.
• [LOBEX-4115] - Advanced view icon diplaying bugs fixed.
• [LOBEX-4119] - Audio source dropdown state updating bug fixed.
• [LOBEX-4131] - Media queries added to improve usability on smaller resolutions.

DP-OPT-150

• [LDC-3177] - Remote device information update is now initiated if the local device sends a PS (Port Satus) message.

MX-FR series

• [LDC-2721] - Log viewer: maximum height set for dropdowns in order to avoid overflowing elements become invisible.

UMX-OPT-TX150

• [LDC-2241] - Gain / offset dialog error fixed.

1.33.2

Released: 2019-10-14

Bug Fixes

Gateway

• [LDC-3172] - Zoom feature has been fixed to work properly on high DPI displays. Automatic zoom has been disabled. Zoom factor can still be set manually via CLI -z option, the value gets remembered.
• [LDC-3176] - MacOS application startup crash has been fixed. If you are affected by this bug, please update manually by downloading and running the installer DMG file.

1.33.1

Released: 2019-10-08

Bug Fixes

RAP-B511

• [LDC-3168] - We have fixed disappearing button icons.

1.33.0

Released: 2019-10-07

New Features

Device Discovery

• [LDC-1649] - Last used tab gets remembered and re-opened when launching the application.

LW3 Devices

• [LDC-1449] - Autoselect displays port names.
• [LDC-1499] - GPIOs are represented by single-pin icons.
• [LDC-1547] - TPS error rate limits are displayed in Cable Diagnostics.
• [LDC-1716] - Background style has been modernized and visual artifacts removed.
• [LDC-1799] - TPS products gained a warning message when wrong remote device is connected.
• [LDC-1800] - EDID page allows multiple slots to be selected on the right panel by Shift + click.
• [LDC-1885] - LW3 Protocol Help content has been updated.
• [LDC-2105] - Mute and Lock have become toggle buttons.
• [LDC-2114] - Crosspoint displays warning when a locked port prevents the requested switch.
• [LDC-2117] - Autoselect has been reworked and moved into a separate dialog.
• [LDC-2172] - Event editor displays remaining character count in event names.
• [LDC-2206] - When restoring a backup, default gateway can also be set.
• [LDC-2324] - Device label is displayed in application window title.
• [LDC-2344] - Zoom factor can be set by running LDC with -z command line option.
• [LDC-2350] - EDIDs can be uploaded in ASCII hex format as well.
• [LDC-2351] - Device label displays connection type and address in a tooltip.
• [LDC-2708] - LW3 terminal has been enlarged to allow more lines to display.
• [LDC-2710] - Crosspoint highlights input and output associated to the button under the cursor.
• [LDC-2960] - Backup files contain device part number, firmware version and revision.
• [LDC-2976] - Backup restore understands @wait(<msecs>) lines to pause command sending.
• [LDC-3102] - Settings / Status page: Serial number and MAC address are copyable.

MX2 matrices

• [LDC-2001] - 'Find my Device' displays a warning before making sounds.
• [LDC-3129] - 'Find my Device' makes sound even if the buzzer is disabled.

HDMI20-OPTC family

• [LDC-2628] - Device clock can be synced to the computer.
• [LDC-3003] - Signal type can be set to HDMI on outputs.

MMX4x2 family

• [LDC-3067] - Video ports have CEC controls added.

MX-FR matrices

• [LDC-1764] - Ethernet enable checkbox has been added to TPS port properties.
• [LDC-2111] - TPS remote device label gets queried and displayed.
• [LDC-2201] - Ports legend has been upgraded to support optical cards.

Bug Fixes

Device Discovery

• [LDC-1996] - We have fixed IP address sorting.
• [LDC-2684] - 'Change IP address' dialog has no default selection anymore to avoid ambiguities.

LW3 Devices

• [LDC-2093] - Memory column width has been increased in Emulated EDID table.
• [LDC-2288] - Autoselect priorities can be adjusted only when priority mode is selected.
• [LDC-2323] - We have added a scrollbar to the Backup restore panel.
• [LDC-2345] - 'Connection lost' dialog has been moved to a separate window which opens above other windows.
• [LDC-2668] - LW3 tree can be expanded by clicking on the node name as well.
• [LDC-2699] - Error message has been made more user-friendly when deleting a password-protected backup.
• [LDC-2704] - Input fields on Network settings page accept only valid addresses.
• [LDC-2705] - Stored backups can be saved by pressing Enter in the dialog.
• [LDC-2717] - Event Manager has been fixed to display long event names properly.
• [LDC-2962] - Event Manager displays a more user-friendly error message when attempting to test an empty event.
• [LDC-2994] - Frame Detector figure has been fixed to show total resolution sums correctly.
• [LDC-3121] - 'Show me button pressed' option has been fixed in Event Manager Wizard on some TPS extenders.
• [LDC-3127] - Miniweb Reset button has been renamed to Clear.
• [LDC-3128] - I/O lock error message displays in the correct window.
• [LDC-3134] - RS-232 recognizer has been fixed to scroll when too many messages received.
• [LDC-3139] - We have fixed a bug which caused some tooltips to display in the wrong window.
• [LDC-3153] - A warning is displayed when the user attempts to upload miniweb via USB.

EDID Editor

• [LDC-2682] - We have fixed scrollbar issues in EDID info window.
• [LDC-2765] - #DN
• [LDC-2772] - We have fixed resizing issues on Byte Editor page.
• [LDC-3085] - We support TMDS Character Rate up to 600 MHz.
• [LDC-3086] - When HDR is checked, HDMI Forum VSDB component gets added.

MX2 matrices

• [LDC-2974] - Port name gets correctly displayed in property window title.

HDMI20-OPTC family

• [LDC-2767] - Uptime display has been made more user-friendly.
• [LDC-3098] - Unnecessary tabs were removed under Control page (Infra and GPIO).

HDMI-TPS-RX110AY

• [LDC-3122] - Remote 12 V measurement display has been added.
• [LDC-3145] - Front Panel Lock help text has been corrected.

MX-FR matrices

• [LDC-1763] - Autotake icon color has been changed to harmonize with LW3 devices.
• [LDC-1776] - We have fixed mute and lock display on MX-TPS boards' remote device dialog.
• [LDC-1884] - In tile view, mute and lock is disabled when view mode is active.
• [LDC-2072] - Grid view scrolling issues have been fixed.
• [LDC-2207] - Remote RS-232 terminal has been fixed to show proper display mode after switching to previous/next port.
• [LDC-2211] - Tile view Properties button has been disabled when no port is selected.
• [LDC-2227] - TPS serial settings are visible but disabled in case a smart TPS device is connected.
• [LDC-2747] - MX-TPS boards have been fixed to recognize MMX4x2-HT200 as a receiver.
• [LDC-2748] - MX-TPS boards have been updated to recognize newer remote TPS devices.
• [LDC-3084] - We have removed the unnecessary tab from MX-FR EDID page.
• [WUTT-462] - We have fixed MX-TPS boards' 'Open remote device settings' when a WP-UMX-TPS-TX130-Plus is connected.

UMX-OPT-150

• [LDC-2225] - We have removed unnecessary empty buttons from port parameters dialog.
• [LDC-2226] - We have fixed pager buttons on the port parameters dialog.
• [LDC-2242] - We have fixed a bug that caused some dialogs to be openable in multiple instances.

1.32.0

Released: 2019-07-04

New Features

LW3 Devices

• [HTT-631] - We have added support for SW4-TPS-TX240-Plus.
• [WUTT-83] - We have added support for WP-UMX-TPS-TX130-Plus.
• We have added support for VINX-120AP-HDMI-ENC, VINX-210AP-HDMI-ENC and VINX-110AP-HDMI-DEC.

UBEX

• [UBEX-5789] - Video Wall Setup page added.
• [UBEX-5834] - Endpoint firmware updater added to MMU GUI.
• [UBEX-5875] - Identify stream / display buttons added.
• [UBEX-5876] - No sync screen settings added to Scaler / Frame rate converter settings.
• We have added the Control/IR tab.

HDMI20-OPTC

• [COR-1690] - Firmware package version is displayed under Settings/Status.
• [COR-1695] - We have added support for all product variants.

Bug Fixes

LW3 Devices

• [LDC-3082] - Broken GUI after configuring an event that sends TCP or UDP message.
• [LDC-3088] - Connecting unsuccessfully via serial port to a device which is in LW2 mode.

UBEX

• [UBEX-6493] - Settings / Network tab: sending commands to the wrong device bug in extender mode fixed.
• [UBEX-6545] - Wrong color space value displaying fixed in case of 4:2:0.
• [UBEX-6590] - Endpoint RS232 baud rate setting bug fixed.
• [UBEX-6695] - RS232 properties panel: Send message widget fixed.

VINX

• [LDC-2971] - We have added the missing LW3 Terminal button.

1.31.0

Released: 2019-06-03

New Features

LW3 Devices

• We have added support for MX2-8x8-DH-8DPi-A, MX2-24x24-DH-12DPi-A-R, MX2-8x8-DH-4DPi-A, MX2-24x24-DH-12DPi-R, MX2-16x16-DH-8DPi-A-R, MX2-8x8-HDMI20-L, MX2-8x8-HDMI20-CA, MX2-8x4-HDMI20-CA, MX2-4x4-HDMI20-CA and MX2-48x48-HDMI20-A-R.

1.30.0

Released: 2019-05-24

New Features

LW3 Devices

• We have added support for RAP-B511 product family.

Bug Fixes

LW3 Devices

• [LDC-3074] - Regressions affecting UMX-HDMI-140-Plus and UMX-TPS-TX140-Plus have been fixed.

UBEX-MMU-X200

• [UBEX-5732] - Search filter synchronization bug has been fixed between Video and Audio layers.
• [UBEX-5778] - Device label positioning bug has been fixed in Device Properties window.
• [UBEX-5794] - Wrong node path has been fixed on Settings / Network tab in Device properties window.

1.29.0

Released: 2019-05-06

New Features

UBEX-MMU-X200

• We have added a new Crosspoint view, the Tile view.
• Endpoints with TRX mode are now supported.
• RA addon is now supported.
• We have added a Control page to the UI with settings and configuration for RS-232 and Ethernet ports of the connected endpoints.
• Device map is now available from the Settings menu.
• The Device properties page has been updated according to the changes of the Extender mode UI.

UBEX-PRO20-HDMI-F1xx family

• We have added support for the Transciever mode (TRX mode).
• RA addon is now supported with an Audio page added to the UI.
• We have added a Control page to the UI which displays information and settings about the RS-232 and Ethernet ports of the device.
• Support for EDID-based scaling has been added to the Scaler panels.
• We have adde more information to the panels on the Crosspoint menu: the number of the stream and the direction of the video/audio interface.
• We have added the IP addresses of each device to the Crosspoint page for easier device identification.
• We have added the IP addresses of each device to the menu items for the EDID Management and Settings menus for easier device identification.

Bug Fixes

UBEX-PRO20-HDMI-F1xx family

• Scaler panels no longer display "Passthrough" when a color conversion is active.
• User EDIDs are no longer listed for RX mode devices.

Known Issues

UBEX-MMU-X200

• On the video crosspoint tile view, the not available connection of the TRX2 mode (local video loop-back) is not displayed properly.
• On the port property panel, the databits field of the endpoint RS-232 ports is empty, the databit count is always 8 bits.
• On the tile of the endpoint RS-232 ports, the command injection port is not updated after changing it on the property panel.

1.28.0

Released: 2019-04-17

New Features

LW3 Devices

• [UTT-1318] - We have added support for UMX-TPS-TX140-Plus.

Device Discovery

• [LDC-3031] - Discovered devices with conflicting IP addresses are marked.

Bug Fixes

LW3 Devices

• [LDC-2669] - Factory Defaults button has been fixed to work on devices with older firmware as well.
• [LDC-3042] - GPIO input and output related controls visibility has been fixed.

UMX-HDMI products

• [LDC-3039] - 'Show me button pressed' option has been fixed in Event Manager.

1.27.0

Released: 2019-03-22

New Features

LW3 Devices

• [UHS-1100] - We have added support for UMX-HDMI-140-Plus.

LW2 Devices

• [MXFR-3819] - We have added support for MX-DVI-4K-IB and MX-DVI-4K-OB.

1.26.1

Released: 2018-12-21

New Features

VINX family

• [LOBEX-2147] - Added a Crosspoint tab to the graphical user interface. In the crosspoint tab it is possible to route any input to any output as long as the number of encoders and decoders in the subnet does not exceed 24 and the number of encoders is less or equal to 16.
• [LOBEX-2759] - Added controls for setting the RS-232 mode to Pass-through or Command injection.

Bug Fixes

VINX family

• [LOBEX-2667] - Fixed a bug that caused the Output scaling radio button group to work hectically when the Output standard is set to DVI.

Known Issues

VINX family

• [LOBEX-2773] - Stream preview doesn't work on MAC OS. As a workaround, we suggest using the built-in web.

1.26.0

Released: 2018-11-13

New Features

LW3 Devices

• [LDC-2038] - Support for FP-UMX-TPS product family has been added.
• [LDC-2685] - Support for VINX-120-HDMI-ENC and VINX-110-HDMI-DEC has been added.
• [COR-1382] - Support for HDMI20-OPTC-TX220-FOX and HDMI20-OPTC-RX220-FOX has been added.
• [MXH2-1683] - Support for MX2-16x16-HDMI20 and MX2-24x24-HDMI20 product families has been added.

UBEX-MMU-X200

• [UBEX-2819] - System Log browser has been added to Settings page.
• [UBEX-3883] - Settings / Status has been extended with Health status section.

MX2 standalone matrices

• [LDC-2788] - We have added navigational buttons to Grid view that can be used to scroll the crosspoint when it could not be displayed completely. We have also added scrolling with the mouse wheel and with touch gestures. Scrollbars show the current position of the crosspoint. We have added port type icons to the port panels of Grid View. The Legend button on Grid View has been replaced to the right end side of the tablist of the Crosspoint menu. The Legend button now opens a new window.

UMX-TPS-TX100 family, UMX-HDMI-140

• [GPI-105] - We have added support for Dark Mode, user replaceable built-in web and disabling default button function.

Bug Fixes

LW3 Devices

• [WUTT-73] - Fixed a bug which truncated port names on property panels.
• [LDC-1822] - Event Manager Delay dropdown item names have been renamed.
• [LDC-2698] - Event Manager 'Condition Test' title has been renamed to 'Condition Counter'.
• [LDC-2874] - We have fixed a bug which prevented re-opening LW3 Help window.

UBEX-MMU-X200

• [UBEX-2373] - Main menu: selected menu item displaying fixed.
• [UBEX-3921] - A checkbox has been added to EDID Management page in order to filter out inactive streams' EDIDs.
• [UBEX-3923] - Export full log button positioning has been fixed.
• [UBEX-4132] - We have changed the styles of selected EDID table rows which belong to inactive UBEXes.
• [UBEX-4135] - We have fixed 'Show inactive UBEXes' checkbox funcionality when switching between Video / Audio tabs.

MX2 standalone matrices

• [LDC-2784] - We have fixed the manual querying commands sent to the device.
• [LDC-2789] - We have added Frame Detector to the port property windows for ports on a card with version of V20 or above.
• [LDC-2801] - We have solved some sizing issues on the Preset preview window.
• [LDC-2803] - We have significantly improved the time it takes to change between Grid View and Tile View.
• [LDC-2804] - Crosspoint switching time has been reduced on Grid View.
• [LDC-2806] - Fixed some issues regarding the port highlights on Grid view when the cursor is hovered over a crosspoint button.

MMX6x2-HT family

• [MMX6X2-574] - We have corrected Beep Duration multiplier label in Event Manager.

HDMI-3D-OPT-RX150RA

• [LDC-2886] - Fixed too many ports showing on USB crosspoint.

HDMI-TPS-TX200 family

• [LDC-2887] - Analog volume setting has been fixed.

DA2HDMI family

• [LDC-2880] - Fixed a bug that prevented editing Device Label.

VINX family

• [LOBEX-1748] - From this version on, the name of the device appears on the tab of the Programmers' LW3 Terminal window.
• [LOBEX-2150] - The list of available output formats has been consolidated and a few output formats have been added.
• [LOBEX-2244] - From this version on, the graphical user interface displays a preview image of the encoder input.
• [LOBEX-2656] - From this version on, the Video Wall parameters are not applied on the fly through the GUI. Instead, the changes are saved by clicking on the corresponding Save button.
• [LOBEX-2672] - Fixed a bug that resulted in wrong output format for scaling set to 1920x1080@50Hz.

UMX-TPS-TX100 family, UMX-HDMI-140

• [UTT-516] - We have added a warning about color space conversion limits.
• [WUTT-71] - 'Show Me button pressed' option in Event Manager Wizard has been fixed.
• [LDC-2809] - We have fixed missing values display on Analog Options dialog.

Known Issues

Gateway

• [LOBEX-2646] - Only the full size LDC installer can be used to upgrade from earlier versions to this version. The reduced size updater notifies the user and will work for later versions.

1.25.0

Released: 2018-08-31

New Features

LW3 Devices

• [MMX8X4-1964] - CEC command list has been extended with 'Clear OSD'.
• [MMX8X4-1958] - Event Manager displays LW3 protocol errors which occour when saving or testing an event.

MMX8x4 family

• [MMX8X4-1919] - Mixer channel presets and scenes have been added.
• [MMX8X4-1934] - CEC controls have been added.
• [MMX8X4-1832] - Mixer channel Factory Defaults buttons have been added.
• [MMX8X4-1952] - Infra Pronto Hex sending has been added.

Bug Fixes

LW3 Devices

• [MMX8X4-1889] - Event Manager dropdown heights have been limited to always fit in the window.
• [MMX8X4-1891] - Connection loss detection has been improved.

MMX8X4 family

• [MMX8X4-1798] - L/R labels have been added to analog audio balance sliders.
• [MMX8X4-1834] - Mixer signal indicator lights gained more contrast. Channels have been renamed to match product chassis labels.
• [MMX8X4-1894] - Cable Diagnostics was not working on TPS ports.
• [MMX8X4-1901] - Mixer EQ labels have been fixed.
• [MMX8X4-1902] - Mixer HDMI IN channel selector dropdown can handle too long port names.
• [MMX8X4-1949] - Mixer GUI is vertically scrollable if the window is not tall enough.
• [MMX8X4-1997] - PoE checkbox has been removed on MMX8X4-HT400MC since it doesn't support PoE.
• [MMX8X4-2000] - Mixer HDMI IN channel selector icons have been changed to match video crosspoint lock icons.

1.24.0

Released: 2018-07-05

New Features

LW3 Devices

• [LDC-2774] - We have added support for UBEX-MMU-X200.

UBEX-PRO20-HDMI-F100

• [UBEX-2915] - We have replaced the Color space converter panels with a Scaler and a Framerate Converter panel on the transmitter side.

1.23.2

Released: 2018-06-25

New Features

LW3 Devices

• [LDC-2745] - We have added support for MX2-8x8-HDMI20-AUDIO-L.

HDMI20-OPTC family

• [COR-1349] - We have added a checkbox to improve compatibility with Panasonic TH-98LQ70.

Bug Fixes

UMX-TPS-TX100 series

• [LDC-2175] - 'Follow video' option was listed multiple times in the autoselect dropdown.
• [LDC-2631] - No sync screen color could not be changed due to insufficient window height.

1.23.1

Released: 2018-06-07

Bug Fixes

LW3 Devices

• [LDC-2750] - Broken EDID page visuals have been fixed.

1.23.0

Released: 2018-05-30

New Features

LW3 Devices

• [LDC-2663] - We have added support for UBEX-PRO20-HDMI-F100.

1.22.1

Released: 2018-04-20

New Features

LW3 Devices

• [LDC-2733] - We have added support for MX2-8x8 with v20 input module.

1.22.0

Released: 2018-04-13

New Features

LW3 Devices

• [LDC-2564] - We have added support for MMX8x4-HT400MC, MMX8x4-HT420M and MMX8x8-HDMI-4K-A.

Known Issues

MMX8x4-HT400MC, MMX8x4-HT420M, MMX8x8-HDMI-4K-A

• [MMX8X4-1891] - Backup creation doesn't work on USB connection. As a workaround, we suggest using TCP/IP connection.
• [MMX8X4-1894] - Cable Diagnostics is not working on TPS ports.
• [MMX8X4-1901] - Equalizer blocks on the Audio tab are labeled in the wrong order.

1.21.0

Released: 2018-01-23

New Features

HDMI20-OPTC family

• [LDC-2681] - We have added HDCP support and HDCP related fields on the Port property windows (requires firmware v1.1.x or above).
• [LDC-2688] - We have added a more detailed message in the Info popup in case the connection to the device is unsuccessful.

Bug Fixes

HDMI20-OPTC-TX220-Pro

• [LDC-2652] - Input port 2 did not display signal bandwidth colors correctly.
• [LDC-2677] - The Port property panel of Input port 2 displayed unused fields, which had been removed.

1.20.0

Released: 2017-11-30

New Features

LW3 Devices

• [LDC-2650] - We have changed the Autotake button's name to "Auto Load" on Crosspoint/Presets tab.

MX2-8x8-HDMI20-Audio

• [LDC-2257] - CEC functionality has been added to MX2-8x8-HDMI20-AUDIO input and output port window.

MMX4x2-HDMI, MMX4x2-HT200

• [LDC-2398] - New Event Manager wizard options have been added.
• [LDC-2619] - We have added a new Audio crosspoint (requires firmware v1.2.x or above).
• [LDC-2620] - We have added a new "Presets" tab to Crosspoint menu.
• [LDC-2621] - Identify Device function is now also available on the Settings/Status/General tab.

Bug Fixes

LW3 Devices

• [LDC-2661] - The Save button on Control/Infra/Ports tab is not activated in some cases.
• [LDC-2664] - In case of too long manual text, the Advanced tab's content does not fit properly in Event Editor window.

Device Discovery

• [LDC-2598] - LDC does not list EDID Manager V4 on MacOS.

HDMI-TPS-RX200 series

• [LDC-2607] - Infra ports can be disabled accidentally.

UMX-TPS-TX100 series

• [LDC-2660] - GPIO Toggle button is displayed on input ports instead of outputs.

Known Issues

LW3 Devices

• [LDC-2648] - The Crosspoint preset preview window only works properly at 100% browser zoom level.
• [LDC-2676] - Detected IR fingerprints are not listed properly until navigating away and back to the Infra tab.

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2331] - Exporting files is not supported in Safari.

Device Discovery

• [LDC-2634] - LDC does not support connecting to HDMI-TPS-RX120-HDSR via RS-232 command injection. (eg. on MMX6x2-HT).

1.19.0

Released: 2017-10-25

New Features

LW2 Devices

• [LDC-2579] - We have added support for HDMI-TPS-RX120-HDSR. Supported connection types are RS-232 and TPS via MX-FR matrices.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2331] - Exporting files is not supported in Safari.

Device Discovery

• [LDC-2634] - LDC does not support connecting to HDMI-TPS-RX120-HDSR via RS-232 command injection. (eg. on MMX6x2-HT).

1.18.0

Released: 2017-09-29

New Features

LW3 Devices

• [LDC-1775] - We have added support for HDMI20-OPTC-TX220-Pro and HDMI20-OPTC-RX220-Pro.
• [LDC-2554] - While emulating Dynamic EDID, the 'EDID memory' row in Video input port properties can now show the name of the output port associated with the Dynamic EDID.

Device Discovery

• [LDC-1565] - Clicking on the 'eye' icon next to the device IP address makes the unit identify itself by blinking LCD screen or LEDs.

Bug Fixes

LW3 Devices

• [LDC-2539] - Toggling the 'Enable editing' checkbox in the Advanced view did not have any effect on the currently opened LW3 node.
• [LDC-2565] - In rare cases when editing an event in the Event Manager's Advanced tab, 'Empty condition' expression appeared instead of 'Custom condition'

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2331] - Exporting files is not supported in Safari.

1.17.2

Released: 2017-09-19

Bug Fixes

Device Discovery

• [LDC-2524] - Pressing the Check now button in the Updater dialog failed to check for new updates.
• [LDC-2525] - The size of the Updater dialog was too small to fit all content without scrollbars.
• [LDC-2581] - There was no feedback after clicking on the Apply button in the Change IP address dialog.

Embedded Web - MX2-8x8-HDMI20-Audio, MX2-8x8-HDMI20-Audio

• [LDC-2549] - Advanced tab on IO ports panel was not refreshing automatically upon changes.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2331] - Exporting files is not supported in Safari.

1.17.1

Released: 2017-08-16

New Features

Gateway

• [LDC-2087] - We have removed the 'View Release Notes' checkbox from the LDC installers. Before upgrading you can check the Release notes in the About window after clicking the Update button. Up-to-date release notes are always available at http://software.lightware.eu/software/release-notes.

Embedded Web - MX2-8x8-HDMI20-Audio, MX2-8x8-HDMI20-Audio

• [LDC-2177] - The 'Signal error rate' field of the Port property panel has been moved to the 'Advanced' tab.
• [LDC-2337] - We have added a new option (High Value mode) to the HDCP enable field on the Port properties panel.
• [LDC-2338] - We have added tooltip for the HDCP Enable field on the Port properties panel.
• [LDC-2339] - We have updated the HDCP capability field on Port properties panel of output ports to display more detailed information.
• [LDC-2408] - We have added a new 'Advanced' tab to the Port properties panel with the following new fields: BCH ECC errors (input ports only), Infoframes, Scrambling, Clock rate.

Bug Fixes

Embedded Web

• [LDC-2080] - We have fixed a bug that prevented the pin of slider control elements to be dragged by mouse.

EDID Editor, Embedded Web - MX2-8x8-HDMI20-Audio

• [LDC-2466] - We have fixed the bug that the EDID Creator failed to create correct binary files during saving.

Embedded Web - MX2-8x8-HDMI20-Audio, MX2-8x8-HDMI20-Audio

• [LDC-2110] - We have removed the Conversion mode field from the Port properties panel of input ports as the device now allows conversion on output ports only.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2331] - Exporting files is not supported in Safari.

1.17.0

Released: 2017-07-27

New Features

LW3 Devices

• [LDC-1657] - We added progress indicator to the Apply action in the Stored configuration window.
• [LDC-1773] - We added support for the new LW3 version of HDMI-3D-OPT-RX150.
• [LDC-2017] - We moved the 'LW3 protocol help' screen to a new window.
• [LDC-2182] - We have added Next and Previous pager buttons to the I/O parameter windows.

HDMI-3D-OPT-TX200

• [LDC-2140] - New USB-KVM crosspoint has been added.

HDMI-3D-OPT-RX150RA

• [LDC-2141] - New USB-KVM crosspoint has been added.

EDID Editor

• [GUIIP-88] - We added HDR settings to the Easy EDID Creator and Advanced EDID Editor.
• [GUIIP-89] - Easy EDID Creator and Advanced EDID Editor now supports 4K resolutions.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.
• [LDC-2331] - Exporting files is not supported in Safari.

1.16.0

Released: 2017-05-25

New Features

LW3 Devices

• [LDC-1354] - We added support for MODEX.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.

1.15.0

Released: 2017-04-12

New Features

Embedded Web - CPU2, MX-FR series (CPU2)

• [LDC-1576] - We have added a legend for the color codes on the crosspoint view.
• [LDC-1578] - Default setting has been changed to 'HDMI passthrough and deembed to AUX audio' for MX HDMI-3D and TPS output boards with audio addon.
• [LDC-1581] - We have added Next and Previous pager buttons to matrix I/O parameter windows.
• [LDC-2069] - After copying an EDID, selection will be reset on the right EDID table.
• [LDC-2083] - When upgrading firmware on MX TPS boards, all ports can be selected at the same time.
• [LDC-2144] - We have added support for MX-4TPS2-4HDMI-OB product.
• [LDC-2181] - We have changed the warning color from red to orange in the Test Pattern Generator.
• [LDC-2185] - 'Reload factory defaults' has been moved to the bottom of the port property dialog.
• [LDC-2186] - Port type & ID appears in a dedicated block instead of the window titlebar.
• [LDC-2187] - Port names are editable by clicking on the pencil icon.
• [LDC-2188] - I/O board types and colors are displayed by text as well.

LW3 Devices

• [LDC-2183] - After copying an EDID, selection will be reset on the right EDID table.

Bug Fixes

LW2 Devices

• [LDC-2195] - We have unified the port panel color codes for MX-4TPS2-4HDMI-IB/OB cards.
• [LDC-2200] - We have fixed a bug that caused IP setting malfunction over serial port.
• [LDC-2212] - We have fixed the Switch to all dialog preset selector dropdown visibility issue.

Embedded Web - CPU2, MX-FR series (CPU2)

• [LDC-2169] - We have fixed a bug which caused drop-down menu items to disappear in MX-DVIDL-OB properties window.

MX-FR series (CPU2)

• [LDC-2213] - We have increased the limit of visible rows to 5000 in the terminal window.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.

1.14.0

Released: 2017-03-10

New Features

LW3 Devices

• [LDC-983] - Modifying serial configuration on RS-232 ports requires confirmation to prevent accidental connection loss.
• [LDC-1741] - Disabling Ethernet ports require confirmation to prevent accidental connection loss.
• [LDC-1742] - We have improved visibility on property group titles. Groups are better separated from each other.
• [LDC-2060] - We have added support for UMX-HDMI-140 product.

UMX-TPS-TX100 series, WP-UMX-TPS-TX100 series

• [LDC-2025] - Icons for balanced analog audio have labels added.

Bug Fixes

LW3 Devices

• [LDC-1567] - We have fixed a bug which allowed the loading splash screen to be closed and interrupt application startup.
• [LDC-2092] - We have fixed a bug in the EDID page which prevented scrolling to the last row and selecting it.
• [LDC-2116] - 'HDMI mode' setting has been renamed to 'Signal type'
• [LDC-2122] - We have fixed a bug which prevented Network settings page from refreshing after loading factory defaults.
• [LDC-2130] - We have fixed a bug which caused unnecessary scrollbars to appear on the EDID page (and possibly other pages).

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.

1.13.0

Released: 2017-02-14

New Features

LW3 Devices

• [LDC-2039] - Support for MMX4x2-HDMI and MMX4x2-HT200 products has been added.

Bug Fixes

LW3 Devices

• [LDC-2099] - We have fixed a bug which prevented the 'Applying device preset...' message from disappearing after loading a preset from a device slot.
• [LDC-2103] - In the Event Manager, under 'Infra code recognized' condition the Hash dropdown has been renamed to 'Code'. Also, it displays a warning when no valid codes found.

HDMI-TPS-RX110AY

• [LDC-2018] - We have fixed a bug which caused Button lock checkbox to operate incorrectly.
• [LDC-2021] - We changed the 'Enabled' checkbox title to 'Enable' on Settings tab.

UMX4x4

• [LDC-2071] - We added the compatibility of the UMX4x4-AUDIO v20 (new audio module), that using different audio output level steps in UMX4x4-Pro2.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.

1.12.1

Released: 2017-01-31

New Features

MX2-8x8-HDMI20-Audio

• [LDC-2030] - We added HDCP 2.2 related settings to port properties.

Bug Fixes

MX2-8x8-HDMI20-Audio

• [LDC-2036] - We added port type icons to Tile view.

Embedded Web

• [LDC-1998] - We have fixed a bug which prevented importing binary EDID files.
• [LDC-1927] - Fixed the bug that only the last opened port property window displayed data.

Embedded Web, LW3 Devices

• [LDC-2016] - We have fixed a bug which prevented importing .edid and .dat EDID file types.

Known Issues

HDMI-TPS-RX200 series, UMX-TPS-TX100 series, WP-UMX-TPS-TX100 series, HDMI-TPS-TX200 series

• [LDC-2018] - 'Button lock' checkbox does not work.

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-2080] - Slider pin cannot be dragged in Chrome in Port Property window.

1.12.0

Released: 2016-12-15

New Features

LW3 Devices

• [LDC-1952] - We have added support for HDMI-TPS-RX110AY.

HDMI-TPS-RX200 series, HDMI-TPS-TX200 series, UMX-TPS-TX100 series, WP-UMX-TPS-TX100 series

• [LDC-190] - RS-232 configuration is disabled when the remote TPS device can override it.
• [LDC-305] - RS-232 Parity setting is forced to 'None' when Data Bits setting is '9'.
• [LDC-1760] - We have added a Button lock checkbox to the Settings / General page. It can be used to disable physical buttons on the device.

Bug Fixes

LW3 Devices

• [LDC-2007] - We have fixed a bug on Control / Infra / IR codes tab which caused IR fingerprints to remain unsaved after the following steps: entering invalid data, correcting it and clicking Save.
• [LDC-2011] - We have fixed a bug in Event Manager which caused the Apply button to remain disabled after editing event details.

Device Discovery

• [LDC-1778] - We have fixed a bug in the Device Discovery which prevented connecting to any device after clicking on the Update button in the About dialog.

Known Issues

LW3 devices

• [LDC-2019] - EDID import from .edid extension does not work.

HDMI-TPS-RX200 series, UMX-TPS-TX100 series, WP-UMX-TPS-TX100 series, HDMI-TPS-TX200 series

• [LDC-2018] - 'Button lock' checkbox does not work.

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1927] - Only the latest browser tab shows data if multiple I/O port propety tabs are opened.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-1998] - Binary EDID files cannot be imported in embedded web. We suggest using LDC or text-based EDID files.

1.11.1

Released: 2016-11-30

Bug Fixes

LW3 Devices

• [LDC-1998] - We have fixed a bug which prevented EDID importing from binary EDID files.

Known Issues

Embedded Web

• [LDC-1925] - Scrollbars on Firefox are not displayed properly.
• [LDC-1927] - Only the latest browser tab shows data if multiple I/O port propety tabs are opened.
• [LDC-1943] - Some pop-up windows may not be displayed in IE, Edge and Safari.
• [LDC-1998] - Binary EDID files cannot be imported in embedded web. We suggest using LDC or text-based EDID files.

1.11.0

Released: 2016-11-24

New Features

LW2 Devices

• [LDC-1577] - We added a confirmation popup window before loading factory defaults on I/O ports.

LW3 Devices

• [LDC-941] - We added an 'LW3 protocol help' button to the Advanced View for better understanding of the LW3 protocol commands.
• [LDC-1624] - We added our brand new Event Manager icon to the Events tab.
• [LDC-1750] - Changed wording on audio properties ('Signal type' is now called 'Audio format', 'Layout' is now called 'Channels').
• [LDC-1758] - We added a brand new icon to the Settings/Network tab.
• [LDC-1774] - We added support for MX2-8x8-HDMI20-Audio.
• [LDC-1875] - We enhanced the LW3 terminal appearance by protocol syntax coloring.

Gateway

• [LDC-412] - We added the ability to set the device's IP configuration from the Device Discovery window.

TPS-TX extenders

• [LDC-1744] - We are now using a labeled (GND, TX, RX) Phoenix connector icon for local serial port panel.

Bug Fixes

LW2 Devices

• [LDC-1670] - We fixed a bug that caused the bottom of some drop-down menus to disappear.
• [LDC-1729] - Fixed a bug with the Frame detector's clock frequency rounding.

LW3 Devices

• [LDC-1204] - We added the ability to turn off 'Enable editing' warning on the Advanced view. Use it only if you are the only user of the LDC on your computer.
• [LDC-1730] - Fixed a bug with the Frame detector log table's cell alignment.
• [LDC-1734] - Fixed a bug that made a comma appear in input fields for numbers.
• [LDC-1801] - We fixed a bug that caused exported event files to lose their extension if the filename had been changed.
• [LDC-1823] - The Apply buttons in Event Manager are now disabled if no valid Condition or Action or Delay is selected.
• [LDC-1834] - We improved the properties' appearance in Advanced View.

Device Discovery

• [LDC-1737] - We increased the width of the device label column to allow extra long names to be displayed.
• [LDC-1738] - Fixed a bug that allowed the device removal confirmation window to be opened multiple times.
• [LDC-1778] - We have fixed a bug in the Device Discovery which prevented connecting to any device after clicking on the Update button in the About dialog.

MX-FR series (CPU2)

• [LDC-1762] - Fixed the 'Outputs' label's alignment issue in crosspoint Grid view.
• [LDC-1826] - Fixed a bug with the Audio mode dropdown on MX-HDMI-3D-OB-A.

1.10.1

Released: 2016-09-08

Bug Fixes

DA2HDMI-Mini

• [LDC-1746] - Fixed a bug that caused black cells in the EDID table for EDIDs without associated rotary position.
• [LDC-1747] - Fixed a bug that caused various incompatibility errors between the LDC and the device's firmware.
• [LDC-1748] - Fixed a bug that prohibited the LDC from creating a backup file for the DA2HDMI-Mini and made the 'Creating backup...' message window stay open indefinitely.

1.10.0

Released: 2016-08-30

New Features

LW2 Devices

• [LDC-460] - Input ports and Output ports are now cleary marked in the crosspoint area of MX, MX-FR and UMX series matrices.
• [LDC-1520] - We are introducing a Log Translator function for the MX-FR (CPU2) matrices. This tool transforms the seemingly gibberish debugging information of log files into a more understandable format. Each line describes what the logged event means (whether it's an issue or just information about normal operation), which port or board is affected, what usually causes the problem and in some cases it also gives some hints on how the user can fix the problem without having to contact the support team. We hope that this feature will save users valuable time.

LW3 Devices

• [LDC-1086] - The LDC now shows Emulated EDID information in the input properties window of LW3 devices.
• [LDC-1127] - System log, Factory defaults and Reboot functions have been moved to the Settings/System tab.
• [LDC-1459] - We are now using tabs instead of buttons wherever possible.
• [LDC-1474] - We redesigned the IR code screen.
• [LDC-1476] - We designed a new terminal window for the Infra/IR codes screen.
• [LDC-1479] - The Settings/Backup screen has been redesigned.
• [LDC-1484] - Before returning to the Device Discovery window, the LDC now displays a pop-up window informing the user about losing connection to a device.
• [LDC-1535] - Crosspoint preset names can now be 16 characters long (instead of 8) and the use of dash, underscore, space characters is also allowed.
• [LDC-1536] - Event Manager now allows dash, underscore and space characters in the names of events.
• [LDC-1575] - We wrote some hints for the autoselect priorities of LW3 devices (i.e. TPS extenders and the MMX6x2-HT2x0).
• [LDC-1579] - We wrote some hints for the RS-232 operation modes of LW3 devices (i.e. TPS extenders and the MMX6x2-HT2x0) to help you figure out which setting does what exactly.

Gateway

• [LDC-1531] - The LDC now remembers the last chosen window size when you run it.
• [LDC-1564] - The LDC software version is now displayed in the window header.

Device Discovery

• [LDC-1435] - The EDID Editor is now accessible straight from the Device Discovery window (Tools menu).
• [LDC-1529] - The Device Discovery window has been completely redesigned. Most notably, Favorite devices and a new Tools button have been added and the different connection interfaces (Ethernet, serial and USB) have been moved to separate tabs.
• [LDC-1570] - The device discovery window now shows the number of devices that are available over the Ethernet.
• [LDC-1585] - We implemented a new function in the Device Discovery window: Favorite devices. You can now use the star icon in each line of the device list to add it to your favourites. We hope that this feature will enable quicker connection to the products you control most often.

MMX6x2-HT

• [LDC-1121] - The maximum length of Device labels has been increased to 39 characters.
• [LDC-1458] - MMX6x2-HT2x0 output port property windows have been unified into one window.
• [LDC-1666] - We made some small changes to the layout of the Crosspoint preset window.
• [LDC-1683] - We added an 'Always keep audio alive' checkbox in the video output parameter window of MMX6x2-HT2x0 devices. This function keeps the HDMI and analog audio outputs alive to maintain audio transmission even when video is not available at the output. If no video signal is present, a 480p black screen will automatically be transmitted. Note: when enabled, 'no signal mode' is not available in the test pattern generator.

TPS-TX extenders

• [LDC-1572] - We added a gap between Video and Audio crosspoints to make it more clear what controls what exactly.

Bug Fixes

LW2 Devices

• [LDC-1558] - Fixed a bug that caused the output properties window of the HDMI-3D-OPT-RX150RA to not refresh automatically.
• [LDC-1668] - Fixed a bug that caused the reported color range not to represent the actual selected color range in case of some MX series input boards (i.e. MX-HDMI-IB).
• [LDC-1669] - Fixed a bug with the Baudrate settings of MX-FR series fiber optical I/O boards. The I/O boards have a different order for the parameters but the LDC can now handle these I/O board specific parameters.
• [LDC-1671] - Fixed a bug that caused the Up/Down buttons not to work inside drop-down menus.
• [LDC-1673] - Changed the naming scheme (uppercase/lowercase, word separation, hypens, colons, etc.) of a lot of things to have a more unified terminology.
• [LDC-1725] - Fixed a bug in the grid view of MX-HDMI-OPT-OB that made the bottom of the port icon not to be colored light grey when the laser was enabled on that port.
• [LDC-1726] - Fixed a bug in the MX-TPS card property window that caused the remote device to be still shown as connected even after the link goes to disconnected state.
• [LDC-1727] - Fixed a bug that made LW2 protocol devices not recognize TPS-TX/RX97 extenders and 25G-TPS boards correctly.
• [LDC-1732] - Fixed a bug that caused certain changes made on an MX-DVII-HDCP-IB port to be accidentally sent to all other ports.

LW3 Devices

• [LDC-1047] - The checkbox icon has been redesigned for better visibility.
• [LDC-1460] - We improved the response time of querying linkable events.
• [LDC-1495] - Fixed a bug that made some content disappear on control pages when resizing the LDC window.
• [LDC-1500] - Fixed a bug with displaying 10 or more events when linking conditions in the Event Manager. If too many events were saved and users wanted to link conditions then there was no scrollbar to reach events higher than Event #10.
• [LDC-1563] - Fixed a bug because of which the '=' character (equal sign) could not be escaped in the Event Manager.
• [LDC-1680] - Fixed a bug that caused some false data to appear in the IR watcher window when opening the Control/Infra/Codes tab of the MMX6x2-HT2x0 while no actual IR signal was detected.
• [LDC-1701] - Fixed a bug in the TPS port Cable diagnostics window. Now the cable length estimation shows 'N/A' instead of '< 20/30 m (Cat5/Cat7)' when no remote device is connected to the port.
• [LDC-1721] - Fixed a bug in the parameter window of the MMX6x2-HT2x0 that made the sliders jump back and forth while the + or - buttons were kept pressed.

Gateway

• [LDC-1046] - Fixed a bug that caused 'MX-FR33 Ready!' text appear in the Name field of the Device Discovery window.
• [LDC-1532] - The LDC is now optimized to allow a minimum supported resolution of 1366x768.

MX-FR series (CPU2)

• [LDC-1561] - Fixed a bug that caused the Audio mode dropdown menu to be empty for the MX-FR series I/O boards with audio breakouts.

MMX6x2-HT

• [LDC-1100] - The icon of the local RS-232 connection has been changed from a D-SUB9 connector to a 3-pole Phoenix connector for the MMX6x2-HT2x0 to better represent the actual connector type of the device.
• [LDC-1101] - We changed the icons of the TPS outputs for the MMX6x2-HT2x0 matrices to make them look like they do in real life (an RJ-45 connector with white a frame and TPS label).
• [LDC-1618] - Fixed an issue with the terminology of the TPS cable diagnostics' window. The unit of the Error rate is not dB, it's only a number. Additionally, the disconnected TPS link state is now better represented by showing 'N/A' instead of '0' values for the error rate and MSE.
• [LDC-1631] - Fixed a bug with the upper limit of the MMX6x2-HT2x0 audio input gain slider. The protocol allows +21.00 dB. Now the slider can also be set to +21.00 dB instead of only +6.00 dB.
• [LDC-1660] - Fixed a bug that caused the Backup description not to be saved in the backup file.
• [LDC-1663] - Fixed a bug that caused the MMX6x2-HT2x0 backup file analyzer not to display the backup description.

TPS-TX extenders

• [LDC-1472] - We brought back the 'Follow video' option (previously called Static mode) for the audio autoselect feature.

UMX-TPS-TX100 series

• [LDC-1562] - Fixed a bug that made the event condition to jump from 'VIDEO/Signal type changes to Undefined' to 'AUDIO/Signal type changes to Undefined' when the Apply button was pressed in the Event Manager of the UMX-TPS devices.

Improvements

LW3 Devices

• [LDC-1645] - We improved the style of some headings and changed the wording of a few functions.
• [LDC-1658] - We improved the Text input field styles.
• [LDC-1659] - We improved the style of text input elements.
• [LDC-1664] - The graphical style of the tables was improved.
• [LDC-1665] - The headers of the EDID table (and all other tables) are now emphasized to visually separate them from the other lines.

TPS-TX extenders

• [LDC-1643] - We changed the icon of the TPS output(s) for the TPS-TX extenders to make them look like they do in real life (an RJ-45 connector with white a frame and TPS label).

1.9.0

Released: 2016-07-01

New features

LW3 Devices

• [LDC-1434] - Support for DA2HDMI-4K-Plus series

1.8.0

Released: 2016-06-09

New features

LW3 Devices

• [LDC-470] - Advanced view is opened in a new window.
• [LDC-1120] - Top bar label shows device label with product name in a tooltip
• [LDC-1475] - Infra timeout sliders removed
• [LDC-1477] - Clear all button at infra settings
• [LDC-1478] - Infra detection indicators has been added to the infra page

Device Discovery

• [LDC-1436] - Pressing enter will save the new Ethernet device when added on Device discovery

HDMI-3D-OPT-TX200

• [LDC-1438] - Support for HDMI-3D-OPT-TX200

Bug fixes

LW2 Devices

• [LDC-166] - Missing switch input to all outputs button on some matrices
• [LDC-688] - Initial caps are unified on labels
• [LDC-1384] - Confirm switch all preference being saved permanently
• [LDC-1393] - Strings containing apostrophe characters sent from a TPS remote RS232 terminal shown in LW2 web terminal properly.
• [LDC-1505] - Report generation on Mac is fixed
• [LDC-1515] - Port properties not loading the initial status
• [LDC-1516] - OPT card serial extension behavior fixed
• [LDC-1517] - MX-TPS-OB-A card port properties fixed.

LW2 Devices, LW3 Devices

• [LDC-1379] - Dropdown lists redesigned for better compatibility.
• [LDC-1509] - Drop-down menu behaviour fixed

LW3 Devices

• [LDC-1510] - Autoselect icon behaviour fixed
• [LDC-1511] - Ethernet tab visibility fix
• [LDC-1522] - Log download confirmation asked only if the connection supports log downloading.
• [LDC-1525] - Event wizard - EDID names are not consistent
• [LDC-1527] - "Show me button pressed" event wizard composes a condition which triggers even if the button tapped multiple times quickly.

Gateway

• [LDC-850] - Supporting Windows 8.1 touch screen events

TPS extenders

• [LDC-1471] - Replaced the old RS232 terminal with a Send message field

1.7.3

Released: 2016-04-27

Bug fixes

Device Discovery

• [LDC-1468] Problem while adding fix IP device

1.7.2

Released: 2016-04-22

New features

MX-FR series (CPU2)

• [LDC-1365] Improved colour strip for MX-TPS-COMBI card
• [LDC-1466] MX-4TPS2-4HDMI-IB support

Device Discovery

• [LDC-1464] Discovered devices are sorted by their product name

Gateway

• [LDC-1122] Device label & Product name columns in Device Discovery

Bug fixes

Embedded Web - CPU2

• [LDC-547] HDMI-OPT-OB port properties: labels don't display
• [LDC-1387] Minor GUI rendering glitch at switch to all modal window
• [LDC-1388] Switch port to all wont close on successful apply on iPad
• [LDC-1392] Fixed terminal button active area placement on safari
• [LDC-1400] Settings / Configuration page probably has a wrong calculated height
• [LDC-1401] GUI element misallignment in settings / configuration
• [LDC-1406] Proper warning for safari file save incompatibility
• [LDC-1407] Safari compatibility fix for Easy EDID Creator.
• [LDC-1409] Unexpected audio settings at port properties page
• [LDC-1410] Cant export log to CSV - iPad
• [LDC-1412] Scrollbar behaviour fixed in port property view
• [LDC-1413] Port property's scrollbar won't scale correctly
• [LDC-1415] Port properties / analog options: background has a different color
• [LDC-1417] GUI background missing from TP port properties tab
• [LDC-1419] Bottom buttons missing at the presets view
• [LDC-1430] Popup warning for incompatible browsers at report generation
• [LDC-1445] Increased the log scrolling responsiveness on iPad

MX-FR series (CPU2)

• [LDC-1453] Window size variation on the 80th input/output

Device Discovery

• [LDC-1446] Fixed minor GUI issues in the update window

Demo mode

• [LDC-1199] Error when uploading EDID after deleting User EDID
• [LDC-1405] Demo mode starts with empty crosspoint field

Gateway

• [LDC-104] Fix for hanging EDID uploads trough a serial port with older devices.
• [LDC-1457] Connection issue to older DA2, DVI-OPT and HDMI-OPT series extenders fixed.

LW2 Devices

• [LDC-1201] Window resize bugfix for in/out 80
• [LDC-1390] GUI element misallignment in the port properties window
• [LDC-1408] Preset preview rendering bugfix
• [LDC-1420] Error message clarified at log delete
• [LDC-1455] Port type color fixed on TPS-COMBI cards HDMI inputs on Tile view
• [LDC-1456] Missing port status icons on TPS-COMBI TPS input ports were put back.
• [LDC-1462] PoE and audio parameters are not set for all inputs

Matrices

• [LDC-1454] MX-3GSDI bugfix for the apply all mechanism

Tasks

Embedded Web - CPU2

• [LDC-840] CPU2 built-in web bootload

1.7.1

Released: 2016-04-11

Bug fixes

• [LDC-1444] Error while connecting to HDMI-OPT-TX100R or HDMI-OPT-TX200R

1.7.0

Released: 2016-04-05

New features

All LW3 devices

• [LDC-1094] New Event Manager features (delay, multiple actions, event testing, infra detection, ethernet command sending, disable function)
• Event Manager new wizard options
• [LDC-1140] Enable editing checkbox in advanced view
• [LDC-1226] Default values for the Ethernet parameters
• [LDC-827] The answer for pushing Manual button should be in popup window
• [LDC-697] Handle incompatible FW versions

MMX6x2-HT

• [LDC-1337] Audio swap support from LDC
• [LDC-1273] Send Message textbox for RS232 ports

Bug fixes

All LW3 devices

• [LDC-752] LDC crosspoint switch slows down with time/usage
• [LDC-1223] Cable diagnostics error rate limits unified
• [LDC-1054] "Loading EDID list" text as feedback while loading EDID list
• [LDC-1104] OSX scrolling over the scroll bar
• [LDC-1373] Maximized window not filled / on restored window the scrollbars duplicated
• [LDC-1037] Missing the Audio info from EDID lists
• [LDC-988] Increase the width of the command line
• [LDC-1052] The width of drop-down menus should be equal to the widest element's width
• [LDC-1042] If the cursor gets on a slider during scrolling, we unwittingly change the slider's actual state
• [LDC-981] Cable diagnostics window
• [LDC-1040] Wrong info is shown as serial number
• [LDC-1316] Advanced view - autoscroll checkbox misplaced
• [LDC-1262] Properties in the advanced view are not refreshing
• [LDC-1220] Spelling mistake: Priority detects -> Priority detect
• [LDC-1203] Change TPS mode 0 to N/A
• [LDC-1177] EDID table fills slowly and gappy
• [LDC-1126] Light and dark row height should be equal in property list
• [LDC-1125] The other IP textboxes should be inactive if DHCP is on
• [LDC-1059] In the Infra hashes learn popup dialog the "Cancel" button's text is hungarian
• [LDC-1055] Change the EDID "save" and "load" label to EDID "import" and "export"
• [LDC-1027] Current IP properties should be at the top of the page
• [LDC-1025] Swap the two colors in the EDID lists
• [LDC-1024] Default selection for control tabs
• [LDC-1023] Settings/Backup page realignment
• [LDC-1022] Black loading label on white background
• [LDC-1019] Causeless separation for Set/Apply in Settings/Network tab
• [LDC-1012] Event page is laggy when scrolled
• [LDC-997] Loadbox timeout too high
• [LDC-995] Special chars not handled in EDID manager page
• [LDC-994] Angle brackets in man string break advanced view
• [LDC-958] No confirmation when backup finished
• [LDC-884] "Switch output to input" wizard item change to "Switch specific input to output"
• [LDC-820] Autoselect input priority maximum value
• [LDC-1090] Operation time unit (sec instead of minutes)
• [LDC-1036] "Choose file" seems a bit odd in the Mac vesion
• [LDC-857] After file save EDID Editors losing their focus

LW2 devices

• [LDC-1212] EDID upload stops at 53% for certain EDIDs
• [LDC-1206] At UMX-OPT-TX150R the emulated EDIDs are listed in numeric format
• [LDC-1063] Regression - DVI related property dialogs fail to load properly
• [LDC-1034] On low resolution the additional cross points are not visible
• [LDC-1029] Special characters in EDID names block the communication
• [LDC-956] Edid editor cannot be loaded if the input/output parameters window is open
• [LDC-753] MX-HDMI-OPT-OB-R cards: no checkbox for HDCP always
• [LDC-743] UMX4x4-Pro2: Frame detector values should be revalidated
• [LDC-728] UMX4x4-Pro: 'set everything to factory default' solution below Global port settings
• [LDC-1380] Error message when a TPS firmware file rejected
• [LDC-1130] Unknown audio addon type breaks audio properties
• [LDC-1038] Frame detector shows empty rows
• [LDC-432] Grid view needed for presets
• [LDC-1408] Show view at the presets page are scrollless

TPS extenders

• [LDC-1175] GPIO tab button active even if no GPIO node present

MMX6x2-HT

• [LDC-1083] Audio configuration is missing from the output parameters
• [LDC-1215] Invalid audio parameters on the output port
• [LDC-1107] PWR5V command is incorrect
• [LDC-1108] Factory defaults setting doesn't affect everything in output parameters window
• [LDC-1091] Autoselect priority setting is not saved
• [LDC-1043] Gain value of the AUX_in is not reported back correctly at the slider
• [LDC-1039] Use "Passthorugh" instead of "Embedded"
• [LDC-1327] MX-CP firmware version query doesn't work

EDID Editor

• [LDC-584] Separate audio entries for two frequencies in EEC
• Many bugs fixed

1.6.2

Released: 2015-10-21

New features

• [LDC-963] Status LEDs on TPS icon
• [LDC-962] Icon for internal Ethernet ports
• [LDC-948] Get a confirmation before start the restore process
• [LDC-947] Handle the connection type on http request
• [LDC-935] Iplement the RS-232 terminal in the TPS port properties view

Bug fixes

• [LDC-992] Nodes are listed three times
• [LDC-991] Ethernet port names
• [LDC-987] Missing buttons from Advanced view
• [LDC-986] Autoselect disabled setting does not work
• [LDC-985] Angle brackets in man string break advanced view
• [LDC-984] Advanced view does not response
• [LDC-982] LDC does not support RS232 connection
• [LDC-980] Frame detector window with some 0 values
• [LDC-978] Port prioroties disappear when re-open port properties
• [LDC-976] 409 GUI code renders to none
• [LDC-975] Loadbox timeout too high
• [LDC-974] Special chars not handled in EDID manager page
• [LDC-973] Opening advanced view fails after the second attempt
• [LDC-971] Baud rate value is mistyped (14400)
• [LDC-970] Improving audio properties layout
• [LDC-968] Replace "AUX" to "Analog audio"
• [LDC-965] MMX6x2 web does not load
• [LDC-959] Select dropdown can show up in wrong window
• [LDC-957] Backup "loading screen" remain visible after the process finished
• [LDC-954] Could not communicate with MX-FR frames
• [LDC-953] Revert to LW3-based EDID up/download
• [LDC-951] Infra code learn - timeout value is invalid
• [LDC-950] Special characters in EDID names block the communication
• [LDC-949] Infra view do not show the Save and Cancel buttons when the command is invalid
• [LDC-944] Backup / Description window resizing problem
• [LDC-943] Incorrect path name at the restored file
• [LDC-942] Command injection setting does not work
• [LDC-938] Basic GUI when connecting
• [LDC-937] Listed parameters are far from the name
• [LDC-934] TPS cable diagnostics - export log feature is missing
• [LDC-933] TPS cable diagnostics - graph and chart view is missing
• [LDC-932] The order in the Audio mode list is invalid
• [LDC-931] The Audio parameters are missing from the Video out properties view
• [LDC-930] The analog audio settings are missing (volume, balance, gain)
• [LDC-929] CPU ethernet port and LINK ethernet port should be hidden
• [LDC-928] Icons are missing in the EDID view
• [LDC-927] Swap the two colors in the EDID lists
• [LDC-926] Tab switcing button label realignment
• [LDC-925] States for buttons on Control/Infra pages
• [LDC-924] Control/Infra layout tweaking
• [LDC-923] Descriptive ID for Control/Infra/Ports
• [LDC-922] Descriptive name for timeout on Control/Infra
• [LDC-921] Input validation for Control/Infra
• [LDC-920] Strange optical illusion on Control/Infra/Hashes|Ports page
• [LDC-955] Reboot when apply network settings - add a sentence

1.5.0

Released: 2015-08-03

New features

• [LDC-814] Support Stereo-addon with ADAV chip
• [LDC-784] UMX-TP-TX110R: Implement the audio autoselect default settings
• [LDC-783] UMX-TP-TX110R: eliminate the deep color mode
• [LDC-781] UMX-TP-TX110R: The preemphase has to be settable
• [LDC-780] UMX-TP-TX110R: The Frontpanel lock has to be settable
• [LDC-771] MX-TPS2-IB/OB: the POE has to be enabled/disabled

Bug fixes

• [LDC-845] Factory default buttons are not reset the PoE settings
• [LDC-844] "Apply change to" scope doesn't take effect on PoE enable commands
• [LDC-843] TPG inputs on TX2xx devices are conceptually wrong in Remote TPS device settings
• [LDC-816] SW4 - LINKOUT HDMI mode select has invalid options
• [LDC-811] EDID list laggs when scrolled by mouse wheel
• [LDC-810] Values on the LDC -> Settings -> Configuration tab are not refreshed automatically
• [LDC-805] TP-TX110R: VGA input parameters
• [LDC-800] UMX-TP-TX110R: There are missing parameters in the input port view
• [LDC-797] LW3 devices: The LDC does not unsubscribe from the /MANAGEMENT/STATUS node when the Settings tab is closed
• [LDC-792] SW4 - The Serial port terminal does not send any command
• [LDC-791] SW4 - The voltage and temperature values are missing from the Setting/Status panel
• [LDC-789] SW4 - No sync screen and TPG setting are missing form the output parameters
• [LDC-788] There is no user feedback when the "Set name" button is clicked in the Event manager
• [LDC-787] After a parameter window looses focus it stucks behind the main window
• [LDC-786] EDID sources are messed up after and EDID changed
• [LDC-777] There are some typos in the description of the TPS FW update
• [LDC-770] SW4-TPS-TX240: in passthought mode the send button does not send the command in the serial terminal
• [LDC-766] The backup process is different in the SW4-TPS-TX240 and UMX-TPS-TX140 devices
• [LDC-764] SW4-TPS-TX240: The HDCP status in missing form the input port parameters
• [LDC-763] 3GSDI-Pro: The report log generation should be revalidated
• [LDC-743] UMX4x4-Pro2: Frame detector values should be revalidated
• [LDC-722] UMX-TPS devices: the EEC (Create) buttons is missing

1.4.0

Released: 2015-06-22

New features

• Supporting HDMI-TPS-TX200 family
• EDID Editor is shown in a dialog

1.3.0

Released: 2015-04-13

New features

• Support for UMX4x4-Pro2 & UMX4x4-BC-Pro2 devices
• Support for WP-UMX-TPS devices
• UMX-TPS backup / restore
• UMX-TPS EDID management: mark invalid EDIDs
• UMX-TPS: confirm factory reset action
• New action in UMX-TPS Event Manager: Show Me button pressed
• Frame detector: polarity display
• Input port property panels display emulated EDID

Bug fixes

• Many bug fixes

1.2.0

Released: 2014-11-12

New features

• UMX-TPS Event Manager support
• More colourful voltage and temperature values in the status view
• UMX-TPS remote control from MX-FR series matrices
• "Force HDCP" feature implemented for the MX-HDMI-OPT-OB boards

Bug fixes

• UMX-TPS minor bugfixes
• Advanced Editor revised refresh rate to pixel clock algorithm
• DP-OPT-TX/RX 150 Report generator fixed

1.1.0

Released: 2014-09-18

New features

• UMX-TPS family support
• Supporting Bonjour device discovery

1.0.2

Released: 2014-08-08

New features

• All dialogs are in separate windows
• TPS firmware upgrade
• TPS cable diagnostics
• Minimatrix navigation bar
• User preferences: Autotake state, Default view (Grid or Tile), Default Switch mode in Tile View (Input or output)
• Bojour Device Discovery support for the new (LW3 based) devices.

Bug fixes

• Upload to user memory in Advanced EDID Editor and Easy EDID Creator
• Several minor bug fixes

1.0.0

Released: 2014-05-20

New features

• Initial release
• Implementing CookieJar for the user preferences.